CrimeMay 02, 2024
4 Indicted in Burglary Ring Targeting Indian, South Asian FamiliesThe men are allegedly responsible for stealing millions in jewelry and other valuables in 43 burglaries in 25 towns across Massachusetts.
Policies & IssuesApr 15, 2019
From Conclave: FTC Do’s and Don’ts Beyond Lab-Grown Diamonds
From pearl treatments to composite gemstones, Tiffany Stevens and Sara Yood of the Jewelers Vigilance Committee shared tips on how to comply with the revised Jewelry Guides.
New York—When the Federal Trade Commission debuted the revised Jewelry Guides in July, the new regulations around lab-grown diamonds were the talk of the industry.
The recent warning letters sent to eight companies regarding their advertisements for lab-grown diamond jewelry and diamond simulants have reignited the discussion, but there are other changes to the guides that warrant attention.
Jewelers Vigilance Committee CEO Tiffany Stevens and Senior Counsel Sara Yood held a session Wednesday at AGS Conclave in Seattle to break down all the changes to the Jewelry Guides.
“We just want to make sure everyone knows what their responsibilities are,” Stevens said.
She noted that while the guidelines are not technically laws, not adhering to them could lead to lawsuits from the FTC or competitors, or even class-action lawsuits from consumers.
Here a few tips and tricks to keep jewelers in compliance.
Be Upfront With Plating
Under the new guidelines, jewelers are required to disclose if a piece of jewelry has been plated with rhodium, platinum or silver. When using rhodium plating, the seller has to assure the durability of the coating.
Yood recommended applying the “reasonable person standard”—meaning the plating will last as long as your average customer would expect—and always disclosing plating to the customer in writing.
Be Mindful of Metal Minimums
There is no longer a 10-karat minimum threshold for gold, meaning 8-karat or below can be labeled gold in the United States.
However, the fineness needs to be disclosed for anything under 24-karat gold.
While there is no minimum threshold for silver, the fineness must be disclosed and a piece must be at least .925 ppt silver to be called “sterling” silver.
If a piece contains more than one precious metal, the predominant metal should be listed first in the description or described in a way that makes it clear.
For example, if a necklace is mostly silver with 14-karat gold accents, the JVC’s presentation suggested describing it as “sterling +14K” or “14-karat gold accented sterling silver.”
Disclose All Pearl Treatments
While not mentioned in previous editions, there is a section in the revised Jewelry Guides about pearl treatments.
A pearl treatment has to be disclosed if the treatment is not permanent, requires special care or significantly affects the value of the pearl, such as dyeing.
The guidelines also recommend explaining any special care requirements a customer would need to know.
Be Clear About Composite Gemstone Products
Disclosure is important when describing products made with gemstone material and filler, such as glass or a polymer.
The recent warning letters sent to eight companies regarding their advertisements for lab-grown diamond jewelry and diamond simulants have reignited the discussion, but there are other changes to the guides that warrant attention.
Jewelers Vigilance Committee CEO Tiffany Stevens and Senior Counsel Sara Yood held a session Wednesday at AGS Conclave in Seattle to break down all the changes to the Jewelry Guides.
“We just want to make sure everyone knows what their responsibilities are,” Stevens said.
She noted that while the guidelines are not technically laws, not adhering to them could lead to lawsuits from the FTC or competitors, or even class-action lawsuits from consumers.
Here a few tips and tricks to keep jewelers in compliance.
Be Upfront With Plating
Under the new guidelines, jewelers are required to disclose if a piece of jewelry has been plated with rhodium, platinum or silver. When using rhodium plating, the seller has to assure the durability of the coating.
Yood recommended applying the “reasonable person standard”—meaning the plating will last as long as your average customer would expect—and always disclosing plating to the customer in writing.
Be Mindful of Metal Minimums
There is no longer a 10-karat minimum threshold for gold, meaning 8-karat or below can be labeled gold in the United States.
However, the fineness needs to be disclosed for anything under 24-karat gold.
While there is no minimum threshold for silver, the fineness must be disclosed and a piece must be at least .925 ppt silver to be called “sterling” silver.
If a piece contains more than one precious metal, the predominant metal should be listed first in the description or described in a way that makes it clear.
For example, if a necklace is mostly silver with 14-karat gold accents, the JVC’s presentation suggested describing it as “sterling +14K” or “14-karat gold accented sterling silver.”
Disclose All Pearl Treatments
While not mentioned in previous editions, there is a section in the revised Jewelry Guides about pearl treatments.
A pearl treatment has to be disclosed if the treatment is not permanent, requires special care or significantly affects the value of the pearl, such as dyeing.
The guidelines also recommend explaining any special care requirements a customer would need to know.
Be Clear About Composite Gemstone Products
Disclosure is important when describing products made with gemstone material and filler, such as glass or a polymer.
Stay away from calling these products “lab-created” or “lab-grown,” or referring to them as “treated” gemstones.
Instead, call it a composite gemstone, hybrid gemstone or a manufactured gemstone.
For example, a seller could describe a lead-glass filled ruby as “composite ruby, lead-glass filled, special care required.”
Also, be careful not to get too creative with varietal naming, the JVC warned in its presentation. It would be considered deceptive to describe golden beryl as a “yellow emerald” or prasiolite as “green amethyst.”
Handmade Products Must Be Made Entirely By Hand
While this might seem obvious, the guides are specific about what it means to say a product is “handmade.”
If a jewelry designer uses CAD software to create a piece, then that’s not considered handmade.
In order to say a product is handmade, the “entire shaping and forming of such product from raw materials and its finishing and decoration were accomplished by hand labor,” the FTC Jewelry Guides state.
If a seller wants to tout something special about a piece that was partially handmade, boast about the specific part of the process that was done manually, such as hand-set or hand-engraved, advised Yood.
A Hashtag Is Not Disclosure
Social media is an indispensable advertising tool for most companies, but sellers need to be mindful of their descriptions on platforms like Facebook and Instagram.
It might be helpful to look back on old social media posts as well to be sure they’re all up to standard, Yood said.
Definitely share that gorgeous ring photo, she said, but understand that “#LabGrownDiamond” is not sufficient disclosure. Give as much detail about the piece as possible.
Eco-Friendly Claims Must Be Backed Up
The recent FTC warning letters mentioned that companies can’t play fast and loose with calling themselves “eco-friendly.” It’s not a throwaway term and needs to be backed up with data, advised JVC.
The FTC has an entirely separate set of guidelines for environmental claims, the “Green Guides.” They apply to all advertising, and the jewelry industry is no exception.
Jewelers with additional questions or concerns about the revised guidelines can visit the JVC’s website for more information about compliance.
More on Policies & Issues
The Latest
CollectionsMay 02, 2024
Foundrae Launches ‘Horizon’ Collection“Horizon” invites individuals to explore the limitless possibilities that lie ahead, said the brand.
FinancialsMay 02, 2024
Pandora Raises Guidance After Strong Q1The jeweler credits its recent “Be Love” campaign and ongoing brand revamp for its 17 percent jump in sales.
Brought to you by
Rio’s Reimagined Podcast: For the Love of JewelersMeet Ben Claus—grand prize winner of For the Love of Jewelers 2023 Fall Design Challenge.
IndependentsMay 02, 2024
Oklahoma Jeweler Glenn Lewis Dies at 68The co-founder of Lewis Jewelers was also the longtime mayor of the city of Moore.
Weekly QuizApr 26, 2024
This Week’s QuizTest your jewelry news knowledge by answering these seven questions.
AuctionsMay 02, 2024
Vintage Baume & Mercier With Ties to Elvis Sells for $7K Elvis Presley gifted this circa 1967 gold and diamond watch to Dodie Marshall, his co-star in “Easy Come, Easy Go.”
Brought to you by
The Blueprint for Success in Scalable, Personalized Jewelry RetailWith Ho Brothers, you can unlock your brand's true potential and offer customers the personalized jewelry experiences they desire.
SurveysMay 01, 2024
Consumer Confidence Falls in AprilConcerns about rising prices, politics, and global conflicts continue to dampen consumer outlook.
TrendsMay 01, 2024
Amanda’s Style File: All Eyes on EmeraldsMay’s birthstone is beloved for its rich green hue and its versatility.
SourcingMay 01, 2024
Opsydia Names New Sales and Marketing Director Jacqui Larsson joins Opsydia with nearly two decades of experience in the industry.
CrimeMay 01, 2024
Grand Jury to Hear Case Against Jeweler Charged in Fatal Shove Following IJO ShowLast month in Dallas, David Walton pushed another jeweler, David Ettinger, who later died.
CollectionsApr 30, 2024
12 Otherworldly Pieces From Tiffany & Co.’s 2024 Blue BookThe “Tiffany Céleste” collection reimagines designer Jean Schlumberger’s interpretations of the universe.
MajorsApr 30, 2024
Zales Celebrates 100 Years With New CampaignThe brand also created a 100-carat lab-grown diamond necklace in honor of its centennial.
MajorsApr 30, 2024
Platinum Guild International Appoints New CEOTim Schlick has been promoted from his previous position as COO.
Events & AwardsApr 30, 2024
Canadian Jewellers Association Brings Back the Summit It’s the second year for the event, slated to take place in October in Toronto.
Recorded WebinarsApr 29, 2024
Watch: Diamond Identification and Evaluation - How to Protect your BusinessSupplier Spotlight Sponsored by GIA
SourcingApr 29, 2024
De Beers to Move Auction HQ from Singapore to BotswanaSales will be paused while the relocation takes place over the next few months.
CollectionsApr 29, 2024
Simone I. Smith Mixes Denim and Diamonds in New Collection“SIS x MISA Denim and Diamonds” is a collaboration between the designer and celebrity stylist Misa Hylton.
IndependentsApr 29, 2024
Venus Jewelers Relocating After 45 YearsThe retailer is moving to a newly designed space in the same shopping center.
SurveysApr 29, 2024
Mother’s Day Jewelry Spending to Reach $7B, Says NRFGifts that are unique and thoughtful are top of mind this year, according to the annual survey.
CollectionsApr 26, 2024
Piece of the Week: Jacquie Aiche’s Starry Galaxy NecklaceThe necklace is featured in the brand’s “Rebel Heart” campaign starring Adam Levine and Behati Prinsloo.
Events & AwardsApr 26, 2024
AGS Conclave and GIA Symposium Are ConvergingThe two organizations will host a joint event, “Converge,” in September 2025.
SourcingApr 26, 2024
Anglo American Reportedly Shopping De Beers as BHP Eyes Anglo Big changes appear to be on the horizon for the diamond miner and its parent company, Anglo American.
Events & AwardsApr 25, 2024
Alexis Padis Takes Over as AGS Board President Padis succeeds Lisa Bridge, marking the first time the organization has had two women board presidents in a row.
EditorsApr 25, 2024
5 Tips for Creating Fans from the Top (Savannah) Banana Jesse Cole, founder of Fans First Entertainment, shared the “five Es” of building a fan base during his AGS Conclave keynote.
WatchesApr 25, 2024
Audemars Piguet and John Mayer Partner on Limited Edition WatchThe Royal Oak Perpetual Calendar "John Mayer" was celebrated at a star-studded party in LA last week.
