"Composite Rubies"

of the stone and determine whether or not fractures pose a durability risk is greatly reduced. So regardless of the "percentage" of lead-glass present, these stones need to be classified separately from others, which major laboratories are now doing. 
    This material is now being called "composite ruby" by an increasing number of gem testing laboratories around the world, and this is the nomenclature recommended by the ICA laboratory commission as the appropriate nomenclature to use for this material. While the amount of lead-glass present doesn't determine its classification--just the presence of lead-glass at all qualifies it for separate classification--even the best material contains much more glass than what is found in traditionally-treated rubies that may have some glass residue or glass-fillings in fractures; the composite-ruby in the market typically contains a huge percentage of lead-glass, much more than is found in stones improved by traditional methods. Increasingly we are finding that lead-glass constitutes 40-50% of composite rubies, or more! According to some labs, stones containing higher percentages of lead-glass are appearing with dramatically increasing frequency.  This is why they are readily available at gem shows around the world for only a few dollars; most of the material in today’s market costs less than $10. per carat, even in large sizes, and much less when buying quantities rather than single stones.

For reasons explained below, an increasing number of groups, including the Accredited
Gemologists Association (AGA) – an organization that has gained international recognition for
its efforts in addressing serious issues affecting the gem and jewelry trade – have taken the position that while these stones have a place in the costume or fashion-jewelry market, they should be sold only in ways that make it clear they are imitations and that they are not genuine rubies. According to an increasing number of experts in the United States, composite rubies do not have the qualities required by the Federal Trade Commission (FTC) in the USA to be represented as either “rubies” or “gems.” They look great—in fact, they often look like very fine rubies, of fine color—but they are not what they appear to be. Buyers need to be aware that this material should not be confused with natural or traditionally-treated ruby nor should it be sold as such.   
 
2. In What Other Ways Do Composite Rubies Differ From Traditionally Treated
    Rubies Containing Glass?

     Composite rubies make great ruby look-alikes, but since they usually have such a high     percentage of lead-glass, they are much less valuable, and much more fragile than natural or    traditionally treated rubies. Consumers and retailers considering the purchase of a composite-ruby     should be aware that these products are much more easily damaged in the course of everyday wear
    than natural or traditionally-treated rubies. As a result, composite- rubies lack the longevity of     natural or traditionally-treated rubies so their beauty can deteriorate quickly.

Composite rubies coming into contact with a variety of common household substances and various types of surfaces that pose no threat to natural ruby or rubies treated by routine techniques have proved disastrous for composite rubies. During the past year, numerous incidences have been reported which have shown that the lead-glass component of these stones is susceptible to scratching, nicking, fracturing and chemical etching from otherwise routine activities that would pose no threat for natural rubies, traditionally treated rubies, or many other gemstones. In addition:  
       
-- Composite rubies differ in cost/value. As mentioned above, these stones typically cost only a 
    few dollars per carat while traditionally treated rubies containing glass sell for hundreds to 
    thousands of dollars per carat.
 
-- The weight of the stone is misleading because it represents the weight of the ruby and
    glass,  combined.  Thus, when stated as the weight of the "ruby" it is inaccurate and inflated
    since frequently 1/3 of the weight, or more, is lead-glass. As a result of the extremely high
    percentage of lead-glass in composites, determining the weight of the actual ruby is virtually
    impossible without expensive, sophisticated testing.
    Traditionally treated rubies that contain glass have minimal amounts of glass present, either
    as residue in surface reaching fissures (as a result of very high heat techniques) or i
n
    fractures that have been filled with glass (called “fracture-filled” or "in-filled" ruby) to reduce
    their visibility or reflectivity. In traditionally treated rubies containing glass, the amount
    of glass is usually much less than the amount of lead-glass added to the low-grade corundum
    used to create composite ruby and thus has very little if any impact on the stones' carat weight.
 
-- One cannot easily determine where the lead-glass ends and the ruby begins in a
    composite ruby so it is much more difficult to judge the stone's clarity accurately.
    Since the corundum is mixed with lead-glass, which has a refractive index (RI) much closer
    to that of ruby, it is much more difficult to accurately judge the clarity for grading
    purposes and, perhaps even more important with composite rubies, it is much more
    difficut (if not impossible) to determine whether or not there are any serious fractures
    that could make the stone more prone to damage from an accidental blow in the course
    of normal wear, or when setting or un-setting the stone.. 

3.  Why Does Composite Ruby Need Greater Care Than Traditionally Treated
     RubyWith Glass?
   
Composite rubies require much greater care than traditionally treated ruby— including extreme care in the course of normal wear—because of the unusually high percentage of
lead-glass present. Lead-glass does not have the hardness of ruby, it lacks the toughness of ruby, it is susceptible to many chemicals and acids that won’t hurt ruby at all, and it can suffer damage from much lower heat than ruby.

 -- Composite rubies make great ruby "look-alikes" but every precaution must be taken
      to avoid contact with substances harder than lead-glass to prevent scratching and to
     protect the stone against accidental knocks or blows that can cause chipping of the lead-
     glass, or worsening of scratches or chips already present; pre-existing scratches,  nicks or
     chips can also be easily worsened with daily wear.  
   
-- Contact with common substances such as lemon juice (which can occur accidentally
    while squeezing a lemon over such things as fish or a salad) can cause acid etching
     of the lead-glass, wherever it reaches the surface, ruining the appearance of the stone.
 
4.   Do Bench Jewelers Need To Handle Composite Rubies Differently Than
     Traditionally Treated Rubies With Glass?
 
YES! Bench jewelers are at extremely high risk unless they are able to distinguish composite-ruby
from traditionally treated ruby.  They must exercise extreme care because composite-rubies look
like ruby but don't respond in the same way to basic techniques jewelers are accustomed to using
when working with ruby. It is imperative that bench jewelers know how to spot composite rubies
because bench jewelers are at great risk of damaging any composite ruby present in any piece of
jewelry on which they are working. Bench jewelers must take every precaution when working with
rubies; those who have had to deal with the consequences of ruining a composite ruby warn that it is
not possible to be “too careful” when handling any ruby today!
 
-- Composite-rubies cannot be subjected to routine bench techniques and can be quickly
    and irreparably damaged doing simple, basic jobs such as re-sizing,  re-mounting,
    or re-plating with rhodium. Immersion in the jeweler's "pickle," and use of a torch for only
    a few minutes, will do extensive, irreparable damage to the appearance of the stone.
             
Why Is The Risk Higher When Working With Composite Ruby Than It Is When Working With
Traditionally-Treated Ruby Containing Glass ?
 
 -- A traditionally-treated ruby with glass residue in surface fissures or glass fillings in
     fractures also requires special care (especially where chemicals and heat are
     concerned) but if damaged, the impact on appearance is much less noticeable and
     can usually be repaired with little or no effect on the value of the stone. This is not the
     case with composite rubies; a damaged composite ruby is a total loss. There have
     been reported cases where a composite ruby has crumbled apart at the jeweler’s bench!
     Some jewelers have sent them to a cutter for re-polishing in the hope of salvaging the situation,
     but the resulting weight loss and size reduction is obvious, and the cost to re-cut the stone
     is usually much more than the cost of the original composite ruby.

5.  Do Composite Rubies Pose Greater Risk To The Jewelry Trade Than
    Traditionally Treated Rubies With Glass?
 
 Yes, composite rubies pose a greater risk to the trade because they are not being identified
  as something that is different from traditionally treated ruby, despite the serious differences
  in durability, longevity, and value.

      -- Composite rubies are sold at gem shows worldwide at prices typically ranging from a
 few dollars per carat up to $25 per carat (and in very rare cases, as much as $100 per carat),
 but most composite rubies sell for under $10 per carat, regardless of size. However, as a
 result of confusion related to what they are, most composite rubies are being misrepresented
 and sold as "traditionally treated ruby" at highly inflated prices, often in the hundreds
 to thousands of dollars per carat. This appears to be the case with several major, national
 retailers in the USA, where composite-rubies are being sold at highly inflated prices. For
 example, a 2.5 carat ruby—that anyone can buy in Tucson or at any other gem show for just a
 few dollars per carat—set in 14 karat gold, with numerous commercial-quality diamonds
 weighing under 1/4 carat, total weight, was sold at one of these chains for over $3,000!
        But it doesn't stop with chain stores.  Composite rubies are now being misrepresented
 as "traditionally treated ruby" and sold at inflated prices in other venues, including auctions
 and antique and estate jewelry shows, sold by reputable—and unsuspecting—antique and
 estate dealers. Gems & Gemology just reported receiving an antique piece with natural pearls
 and what appeared to be a very fine ruby at its center, which was found to be a “lead-glass filled”
 ruby--a composite! Composite-rubies are also beginning to appear in traditional jewelry stores,
 being misrepresented and sold as traditionally treated ruby, at inflated prices. And making
 matters worse, many appraisers who have not kept current about this issue are failing to properly
 disti
nguish between composite ruby and traditionally-treated ruby with glass residues or
 in-fillings, resulting in inflated appraisal valuations.
 
      -- If sold at prices amounting to a few dollars, as "fashion" or "costume" jewelry, no one                    
           would care if they get scratched or damaged with normal wear, nor would anyone
           bother to take them to a jeweler for remounting, etc. But this is not currently the
         case; people are paying inflated prices for something they believe to be a "ruby"
         when it is an entirely different product, and if damaged by a retailer or bench
         jeweler they cannot be repaired. In such cases, the customer -- who usually does not
         know what they have, and who will certainly not believe they did not have a fine ruby
         unless this was pointed out immediately when they left what they believed to be a
         "precious" gem with the jeweler -- will expect remuneration for whatever they paid for
         it (usually much more than it's worth) or expect replacement with a “real ruby." In these
         cases, in addition to the financial loss, the jeweler’s reputation is also damaged and the
         customer is probably lost forever.

  Where Risk To The Trade Is Concerned, How Do Composites Differ From Traditionally 
  Treated Ruby That Contains Glass?
 
 There is much MORE risk of financial loss or damage to one’s reputation when selling or
  working on a piece of jewelry containing a composite-ruby than  there is when selling
  or working on a piece of jewelry containing rubies treated by  traditionally accepted techniques,
  even one with glass residue in fissures or one  that has been fracture filled. In cases where damage

does occur with a traditionally “treated” ruby, re-polishing or re-filling can usually restore the
stone to its prior appearance, at minimal or no cost to the bench jeweler/retailer, and without
affecting the value of the ruby. While damage to a traditionally-treated ruby can be repaired with little
or no loss in stone weight or value, this is NOT the case with composite ruby; a damaged composite
ruby is usually a total loss!
 
A SUMMARY OF THE DIFFERENCES BETWEEN COMPOSITE RUBY AND TRADITIONALLY TREATED RUBY WITH GLASS
 
When the glass used in the treatment is lead-glass, regardless of the actual amount of lead-glass present (although 30%-60% seems to reflect the current norm), the differences between such a stone—a composite ruby—and a natural or traditionally treated ruby with glass in fissures or in which fractures have been glass-filled, are much greater than "stability." Composite rubies are not "the same thing" as a traditionally treated ruby with minimal normal glass in a fracture or in which glass residue is present in small fissures; composite rubies are NOT traditional glass-filled rubies. They are an altogether different product that is much less durable, has limited longevity, requires very different care, has a dramatically lower value, and does not qualify as either a “ruby” or a “gem.”
 
There is a market for composite ruby, and probably a very large market, but not as a genuine ruby, traditionally treated or otherwise. There must be a clear distinction made between composite ruby and other rubies in the marketplace. Retailers, manufacturers, designers, bench jewelers, and appraisers must understand the differences and be able to recognize and distinguish between them. And consumers must also be educated about these stones so that they understand they are in the marketplace, and so that they can make informed choices about their purchases.